INTERIOR EQUIPMENT
85
The battery side of the hand−held transmitter must be pointed
away from the HomeLink
R
during the programming process.
For Canadian users, follow the procedure in “Programming an
entrance gate/programming all devices in the Canadian
market”.
1. Decide which of 3 HomeLink
R
buttons you want to program.
"
1
HomeLinkr
2
Hand−held garage transmitter
3
25 to 75 mm (1 to 3 in.)
2. Place your hand−held garage transmitter 25 to 75 mm (1 to
3 in.) away from the surface of the HomeLink
R
.
Keep the indicator light on the HomeLink
R
in view while
programming.
To Next Page
Loading...
