OCCUPANT RESTRAINT SYSTEMS
126
Make sure the tabs are securely locked in the cover.
To release the concave end tab, see page 136 for instructions.
NOTICE
The seat belts and the buckles must be stowed before
you remove the seats.
1. Lower the outboard head restraints to the lowest
position and remove the center head restraint.
2. Unfasten the zippers behind the right side seatback and
stow the center head restraint into the seatback.
3. Unlock the seatbacks by pushing the lock release
levers forward and fold them down.
To Next Page
Loading...
