BPY011
BPY019
K Shift while pressing the brake pedal.
(Ignition switch must be in the “ON” position.)
OPERATION OF SELECTOR LEVER
SELECTOR LEVER POSITION
P: Parking, engine starting and key removal
position
R: Reverse position
N: Neutral position
D: Normal driving position
(shifting into overdrive possible)
4: Position for engine braking
(shifting into overdrive not possible)
3, 2: Position for more powerful engine braking
L: Position for maximum engine braking
NOTE: When the cruise control is being used, even if you downshift from “D” to “4”, engine braking will not be enabled
because the cruise control is not cancelled. For the operation to decrease the vehicle speed, see page 365.
QUICK REFERENCE
3
3. AUTOMATIC TRANSMISSION
To Next Page
Loading...
