IN CASE OF AN EMERGENCY
435
When connecting the jack handle extensions, use a
Phillips−head screwdriver or jack handle to tighten the
bolts on the joints as shown in the illustration. When
connecting the jack handle with extension, tighten the
bolt on the joint securely. Make sure the hollow meets
the bolt on every joint when you tighten the bolts.
NOTICE
Tighten all the joints securely. Otherwise, the
extension may come off and it may damage the
paint or vehicle body.
40PY053
"
1
Lower
2
Raise
3
Cloth
To Next Page
Loading...
