Functional overview(P. 208)
Connecting to Wi-Fi
®
Hotspot using eas
y setup
If the Wi-Fi
®
de
vice is compatible with Wi-Fi Protected Setup™
*1
, connecting a
device is even easier.
1 Touch [
] from the main menu.
2 T
ouch sub menu [Wi-Fi] > [Hotspot] in
this order.
3 Set [Hotspot] in the main area to on.
A message may be displayed depend-
ing on the multimedia system settings.
Perform the operation according to the
screen guidance.
4 Touch [Connect without password]
from the main area.
The multimedia system will begin accepting connections with easy setup.
● No selections can be made while driving.
● This is only for WPS supported devices.
● This cannot be selected when the maximum number of devices are already connect-
ed.
5 Operate the Wi-Fi
®
device to establish a connection.
● Refer to the Wi-Fi
®
device’s instruction manual for information on how to connect
using the Wi-Fi
®
device's easy setup.
● A connection failed message will be displayed if the acceptance time is exceeded.
Disconnecting Wi-Fi
®
Hotspot
Wi-Fi
®
Hotspot can be disconnected b
y turning off the Wi-Fi
®
Hotspot function.
1 Touch [
] from the main menu.
*1 :
W
i-Fi Protected Setup™ is a trademark of Wi-Fi Alliance
®
.
3-2. Connecting to a Wi-Fi
®
netw
ork
108
To Next Page
Loading...
