INFORMATION
● The black par
ts around the vehicle icon are not displayed by the camera. Visually
check those areas.
● As the images are obtained from four cameras are processed and displayed on
the standard of a flat road surface, see-through view, moving view, panoramic view
(including zoomed display), side clearance view, and cornering view may be displayed
as follows:
• Objects may look collapsed; thinner or bigger than usual.
• An object with a higher position than the road surface may look further away than it
actually is or may not appear at all.
• Tall objects may appear protruding from the non-displayed areas of the image.
● Variations in the brightness of the image may appear for every camera due to lighting
conditions.
● The displayed image may be misaligned due to inclination of the vehicle body or
change in vehicle height caused by the number of passengers, vehicle load, and
quantity of fuel.
● If the doors are not completely closed, the image and the guide lines may not be
displayed correctly.
● The positional relationship of the road surface and objects with the vehicle icon
displayed on see-through view, moving view, panoramic view (including zoomed
display), side clearance view, and cornering view may differ to the actual positions.
● Light from a back-lit license plate may appear on the screen.
● Images indicated by [○] in the figure are
a composite, and hence some areas may
be difficult to see.
8-2. Panoramic view monitor
266
To Next Page
Loading...
