Setting up how to identify a driver
Set a de
vice in order to identify a driver. When the engine switch is turned to ACC
or ON and a registered device is detected, the profile that the device is assigned to
is automatically loaded. You can select a smartphone or some other device as the
device to identify the driver.
1 Touch [
] from the main menu.
2 Touch [Personal info] on the submenu.
3 Select the desired item.
Setting Description
User profile name The name of the user profile is displayed.
"Bluetooth devices"
Driver identification is performed us-
ing a smar
tphone or other Bluetooth
®
device and the applicable profile is
loaded. Touch [Link devices] to regis-
ter.(→ P.100)
"Face identification"
*1*2
Driver identification is performed using a
face and the applicable pr
ofile is loaded.
Touch [Setup face] to register.(→ P.54)
To delete the registered face information,
touch [Remove face].
[Link k
ey]
*2*3
Driver identification is performed using
the v
ehicle’s smart key and the applicable
profile is loaded.
[Reset settings]
Some multimedia settings for the select-
ed user profile will be reset.
[Delete driver]
The selected user profile will be removed
from the vehicle.
*1 : If equipped
*2 : R
efer to the separate "OWNER’S MANUAL".
2-3. Driver settings
53
2
Settings and registration
To Next Page
Loading...
