EasyManua.ls Logo

Lexus GX550 2024 - Registering a Bluetooth Device from the Multimedia System; System

Lexus GX550 2024
310 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Registering a Bluetooth
®
de
vice from the multimedia system
A cellular phone or portable device must be registered in order to use hands-free
calling or Bluetooth
®
audio. Once registration is complete, Bluetooth
®
will auto-
matically be connected each time the multimedia system is started.
When Apple CarPlay/Android Auto is connected via USB, the device will be
registered automatically.
If no Bluetooth
®
device is connected, the registration screen can also be displayed
by pressing and holding the [
] s
witch on the steering wheel.
INFORMATION
A cellular phone can be r
egistered as both a hands-free phone and Bluetooth
®
audio
device.
Up to 5 Bluetooth
®
devices can be registered. However, a maximum of 2 devices can
be used as a hands-free phone. (Setting of a driver is required to connect 2 hands-free
phones.)
Refer to the Bluetooth
®
device’s instruction manual for information on how to operate
the Bluetooth
®
device.
Registration will need to be repeated once for each Bluetooth
®
device if multiple
Bluetooth
®
devices will be used.
A PIN code is a verification code used when registering a Bluetooth
®
device to the
multimedia system.
Dialing may be locked out after connecting, depending on the cellular phone settings.
Cancel the auto lock function on the cellular phone before use.
If another device is registered while connected to a cellular phone or portable
device, the connection to the portable device or cellular phone playing audio will be
disconnected.
For safety reasons, devices cannot be registered while driving.
If Bluetooth
®
device registration cannot be completed, restart the Bluetooth
®
device.
1 T
ouch [
] from the main menu.
2 T
ouch [Bluetooth & Devices] on the sub menu.
If no device is registered, proceed to Procedure 4.
3 Touch [Add another device].
While a device is connected to the multimedia system, the confirmation screen for
disconnecting the device may be displayed. Disconnect the device to perform registra-
tion.
3-1. Using the Bluetooth
®
function
92

Table of Contents

Related product manuals