544
7-2. Steps to take in an emergency
1 Ensure that the shift lever is in P and
depress the brake pedal.
2 Touch the Lexus emblem side of
the electronic key or card key (if
equipped) to the engine switch as
shown in the illustration.
When the electronic key is detected, a
buzzer sounds and the engine switch will
turn to ON.
When the smart access system with push-
button start is deactivated in customization
setting and ACC customization is in on,
the engine switch will turn to ACC.
3 Firmly depress the brake pedal and
check that and a message
are displayed on the multi-informa-
tion display.
4 Press the engine switch shortly and
firmly.
In the event that the engine still cannot
be started, contact your Lexus dealer.
■ Stopping the engine
Shift the shift lever to P, set the parking
brake and press the engine switch as you
normally do when stopping the engine.
■ Replacing the key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.499)
■ Alarm
If a door is unlocked using the mechanical
key when the alarm system is set, the alarm
may be triggered. (P.65)
■ Changing engine switch modes
Release the brake pedal and press the
engine switch in step 3 above.
The engine does not start and modes will be
changed each time the switch is pressed.
(P.196)
■ When using the mechanical key and
operating the power windows or
moon roof (if equipped)
Operate the power window or moon
roof after checking to make sure that
there is no possibility of any passenger
having any of their body parts caught in
the window or moon roof. Also, do not
allow children to operate the mechanical
key. It is possible for children and other
passengers to get caught in the power
window or moon roof.
Starting the engine
To Next Page
Loading...
