90
2-1. Instrument cluster
The display is reset each time the engine is
started.
Peak hold function
If lateral G-forces of 0.5 G or greater are
generated, the G-force value display will
turn amber and be held for 2 seconds.
■ G-force display
● The G-force values may not be zero even
when the vehicle is parked, such as when
it is parked on an incline.
● Depending on the vehicle usage condi-
tions, the brake fluid pressure display
may not reach its maximum reading even
though the brake pedal is fully depressed.
● If a battery terminal is disconnected and
reconnected, the steering amount dis-
play may be disabled temporarily. After
driving the vehicle for a while, the display
will be enabled.
Displays “Gain” values, manual brake
outputs, trailer brake types, and the
trailer connection status. (P.403)
Displays no drive information contents
on the multi-information display.
The tire pressure detected by the tire
pressure warning system can be dis-
played on the Center display.
■ Displaying the tire pressure on the
Center display
1 Select on the main menu.
2 Select “Tire pressure”.
■ Tire inflation pressure
P.487
Fuel consumption information can be
displayed on the Center display.
■ Displaying fuel consumption/his-
tory screen on the Center display
1 Select on the main menu.
2 Select “Trip information”.
3 Select “Current” or “History”.
■ Current fuel consumption screen
Resetting the history data
Fuel consumption in the past 15
minutes
Current fuel consumption
Average vehicle speed since the
engine was started.
Trip range
Elapsed time since the engine was
started.
Use the displayed average fuel consump-
tion as a reference. The image is an exam-
ple only, and may vary slightly from actual
conditions.
Trailer brake controller
Blank (No items)
Tire pressure
Current fuel consumption/his-
tory screen
A
B
C
D
E
F
To Next Page
Loading...
