154
2-2. Instrument cluster
n Gear position display
(vehicles with an automatic transmission only)
Indicates the current gear, and the range of gears
that is available when the shift lever is in the D or S
position. the gear range is shown by the number of
dots (•) and the current gear is shown as a number.
The transmission automatically selects the gears
within the driver selected gear range.
In the illustration to the left, a range of 6 available gears
(1 through 6) has been selected by the driver. (The shift
lever is in the D or S position with 6 ranges enabled) It is
possible for the transmission to automatically select
between all 6 of the gears. In this case, the transmission
has selected third gear.
n System check display
After switching the “ENGINE START STOP” switch to IGNITION ON mode,
“CHECK” is displayed while system operation is checked. When the system check
is complete, “COMPLETED” is displayed before returning to the normal screen.
n Outside temperature display
In the following situations, the correct outside temperature may not be displayed, or
the display may take longer than normal to change.
l When stopped, or driving at low speeds (less than 12 mph [20 km/h])
l When the outside temperature has changed suddenly (at the entrance/exit of a
garage, tunnel, etc.)
To Next Page
Loading...
