55
LC500_LC500h_QG_OM11670U_(U)
Multi-information display
Turning the BSM function/RCTA function on/off.
The RCTA function is available when the BSM function is on.
Outside rear view mirror indicators
BSM function:
When a vehicle is detected in a blind spot of the outside rear view mirrors or approach-
ing rapidly from behind into a blind spot, the outside rear view mirror indicator on the
detected side will illuminate. If the turn signal lever is operated toward the detected
side, the outside rear view mirror indicator will flash.
RCTA function:
When a vehicle approaching from the right or left at the rear of the vehicle is detected,
both outside rear view mirror indicators will flash.
BSM (Blind Spot Monitor)
The Blind Spot Monitor is a system that has 2 functions;
● The BSM (Blind Spot Monitor) function
Assists the driver in making a decision when changing lanes
● The RCTA (Rear Cross Traffic Alert) function
Assists the driver when backing up
These functions use same sensors.
Except Convertible Convertible
To Next Page
Loading...
