183
4
4-2. Driving procedures
Driving
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
■ If the indicator flashes faster than usual
Check that a light bulb in the front or rear
turn signal lights has not burned out.
■ If the turn signals stop flashing before a
lane change has been performed
Operate the lever again.
■ Customization
P.436
Turn signal lever
Operating instructions