194
4-3. Operating the lights and wipers
■ Switching to high beam
Press the Automatic High Beam
switch.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Automatic
High Beam system again.
*
:If equipped
Turns the rear fog light on
Releasing the switch ring returns it to .
Operating the switch ring again turns the
rear fog light off.
■ Rear fog light can be used when
The headlights are turned on.
Each time the headlights are turned off, the
rear fog light is turned off.
Fog light switch
*
When in difficult driving conditions,
such as in rain and fog, turn on the
rear fog light to notify following
vehicles the existence of your vehi-
cle.
Turning on the rear fog light
To Next Page
Loading...
