240
4-5. Using the driving support systems
*
: If equipped
■ Meter display
Display
Set speed
Indicators
■ Operation switches
Vehicle-to-vehicle distance switch
“+RES” switch
Cruise control main switch
Cancel switch
“-SET” switch
Dynamic radar cruise con-
trol
*
In vehicle-to-vehicle distance con-
trol mode, the vehicle automati-
cally accelerates and decelerates
to match the speed changes of the
preceding vehicle even if the accel-
erator pedal is not depressed. In
constant speed control mode, the
vehicle runs at a fixed speed.
Use the dynamic radar cruise con-
trol on freeways and highways.
Vehicle-to-vehicle distance con-
trol mode (P.242)
Constant speed control mode
(P.245)
System components
A
B
C
■ Before using dynamic radar cruise
control with full-speed range
● Driving safely is the sole responsibility
of the driver. Do not rely solely on the
system, and drive safely by always pay-
ing careful attention to your surround-
ings.
● The dynamic radar cruise control with
full-speed range provides driving
assistance to reduce the driver’s bur-
den. However, there are limitations to
the assistance provided.
Read the following conditions care-
fully. Do not overly rely on this system
and always drive carefully.
• When the sensor may not be correctly
detecting the vehicle ahead: P.247
• Conditions under which the vehicle-
to-vehicle distance control mode may
not function correctly: P.248
A
B
C
D
E
To Next Page
Loading...
