Dynamic Laser Cruise Control
15
Depress the accelerator or brake pedal to attain the desired speed.
Press the control lever downward in the “– SET” direction and release it.
This sets the vehicle at that speed.
If a vehicle is detected ahead of you: Your cruising speed changes in proportion to the speed
of the vehicle ahead to maintain an appropriate distance from your vehicle to the vehicle ahead.
If there was no vehicle ahead, your cruising speed will be gradually increased up to the preset speed.
If no vehicle is detected ahead of you: Your cruising speed is
maintained at the preset speed.
Cancelling
To stop the operation: Push the “ON–OFF” button to turn off.
To stop the operation temporarily:
Pull the control lever in the “CANCEL” direction.
To resume follow–up cruising or cruising at fixed speed,
press the control lever upward and release it.
Operation Procedure
The operation procedure is shown as follows. For the detailed information, see Section 3–1 in the “Owner’s Manual”.
Setting
Push the “ON–OFF” button to turn on the system. The “CRUISE” indicator light in the instrument cluster comes on and “RADAR
READY” appears on the multi–information display.
See Owner’s Manual for Complete Information.
To Next Page
Loading...
