527
5-4. Using the audio system
5
Interior features
LS460/LS460L_U (OM50D48U)
To turn the audio system on, press the “MODE” switch.
Press the “MODE” switch to select an audio mode.
Each press changes the mode sequentially if the desired mode is ready to
use.
Press the “+” switch to increase the volume and the “-” switch to decrease
the volume.
Hold down the switch to continue increasing or decreasing the volume.
Press and hold the “MODE” switch.
To cancel, press and hold the “MODE” switch again.
Press the “MODE” switch to select the radio mode.
Press the “” switchor the “” switch to select.
Press the “MODE” switch to select the radio mode.
Press and hold the “” switch or the “” switch until you hear a beep.
To cancel, press either switch.
Turning the audio system on
Changing the audio source
Adjusting the volume
Silencing a sound or pause the current operation
Selecting the preset station/channel
Seeking a radio station/channel
1
2
1