Lexus LS460 - Engine (Ignition) Switch

34
LS460_460L_QG_U
Engine (Ignition) Switch
■ Starting the engine
Turn the engine switch to IGNITION
ON mode and check that the parking
brake is set.
Check that the shift lever is set in P.
Firmly depress the brake pedal.
The engine switch indicator will turn
green. If the indicator does not turn
green, the engine cannot be started.
Press the engine switch.
The engine will crank until it starts or
for up to 30 seconds, whichever is
less. 
Continue depressing the brake pedal
until the engine is completely started. 
The engine can be started from any
engine switch mode.
■ Stopping the engine
Stop the vehicle.
Shift the shift lever to P.
Set the parking brake.
Press the engine switch.
Release the brake pedal and check that the indicator on the engine switch is off.
Performing the following operations when carrying the electronic key on your person
starts the engine or changes engine switch modes.
1
2
3
4
1
2
3
4
5