55
LS460_460L_QG_U
Dynamic Radar Cruise Control with
Full-speed Range (if equipped)
Vehicle-to-vehicle distance button
Display
Set speed
Indicators
Cruise control switch
■ Setting the vehicle speed (vehicle-to-vehicle distance control mode)
Press the “ON•OFF” button to acti-
vate the cruise control.
Radar cruise control indicator will
come on and a message will be
shown on the multi-information dis-
play.
Press the button again to deactivate
the cruise control.
Accelerate or decelerate the vehicle
to the desired speed, and push the
lever down to set the speed.
“SET” indicator will be displayed.
The vehicle speed at the moment the
lever is released becomes the set
speed.
Dynamic radar cruise control with full-speed range supplements conventional cruise
control with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control
mode, the vehicle automatically accelerates, decelerates or stops in order to maintain a
set following distance from vehicles ahead.