304
2-4. Using other driving systems
■ Camera sensor (with driver monitor system)
Observe the following to ensure that the PCS functions correctly:
● Do not subject the camera sensor to strong impact or force, and do not disas-
semble the camera sensor.
● Do not scratch the camera lens, or let it get dirty.
■ Headlights (with driver monitor system)
Observe the following to ensure proper near-infrared ray projection:
● Keep the headlights clean at all times.
● The detection performance may deteriorate if the high beams are misaligned or
the high beam is inoperative.
■ Precautions for cleaning the driver monitor sensor (with driver monitor system)
● Gently wipe the sensor with a soft cloth to prevent damage.
● Wipe any excess dirt with a cloth dampened with neutral detergent, all liquids
having been wringed out of the cloth. After that, wipe again with a dry cloth.
● Do not use benzene, thinner, glass cleaners, wax, etc.
To Next Page
Loading...
