370
3-3. Using the audio system
Setting station presets
Search for desired stations by turning or pressing “” or
“” on “SEEK•TRACK”.
Press and hold the button (from “1” to “6”) the station is to be set
to, and you will hear a beep.
Scanning radio stations
■ Scanning the preset radio stations
Press and hold “SCAN” until you hear a beep.
Preset stations will be played for 5 seconds each.
Press “SCAN” once again, when the desired station is reached.
■ Scanning all radio stations within range
Press “SCAN”.
All stations with reception will be played for 5 seconds each.
Press “SCAN” once again, when the desired station is reached.
To Next Page
Loading...
