615
3-8. Other interior features
3
Interior features
■ If “C” appears on the display
Stop the vehicle where it is safe to drive in a circle.
Drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is
displayed.
If there is not enough space to drive in a circle, drive around the block until
the direction is displayed.
■ While driving the vehicle
Do not adjust the display. Be sure to adjust the display only when the vehicle is
stopped.
■ When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the neigh-
borhood. Do not violate any local traffic rules while performing circling calibration.
■ To avoid the compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror.
Doing this may cause a malfunction of the compass sensor.
■ To ensure normal operation of the compass
● Do not perform circling calibration of the compass in a place where the earth's
magnetic field is subject to interference by artificial magnetic fields.
● During calibration, do not operate electric systems (moon roof, power windows,
etc.) as they may interfere with the calibration.
To Next Page
Loading...
