1-3. Adjustable components (seats, mirrors, steering wheel)
The rear seat position can be memorized and recalled with the touch of a
button.
■ Entering a position to memory
Turn the “ENGINE START STOP” switch to IGNITION ON
mode.
Adjust the rear seat to the desired position.
Press the “SET” button until the
signal beeps.
If the preset is being used, the
previously recorded seat posi-
tion will be overwritten.
■ Recalling the memorized position
Press the “M” button until the
signal beeps.
Relaxation seat: The memo-
rized position will only be
recalled if the ottoman is in a
position higher than the memo-
rized position. It will not move in
an upward direction.