114
3-3. Adjusting the seats
Seat cushion (front) angle adjust-
ment
Vertical height adjustment
Lumbar support adjustment
Seat cushion length adjustment (if
equipped)
■ Center Display
1 Press the seat switch.
2 Select “Adjustments” on the center
display.
3 Select the driver’s seat or front pas-
senger’s seat.
4 Select the button for the desired
adjustment.
Head restraint (if equipped)
(P.130)
Shoulder bolster (if equipped)
Lumbar support
Pelvic support
Hip support (if equipped)
Seatback side bolster and seat
cushion side bolster (if equipped)
5 Perform adjustment using the dis-
played buttons.
The seat will move while a button is
selected.
■ When adjusting the front seats
While adjusting a front seat, to avoid con-
tact with the ceiling, instrument panel or
rear seats, the operation of the seat may be
restricted or parts of the seat other than that
being adjusted may move.
■ Operation after the engine switch is
turned off
After a certain time elapses after the engine
switch is turned off, the following parts of
the front seats will move to their neutral
positions.
● Shoulder bolster (if equipped)
● Lumbar support
● Pelvic support
● Hip support (if equipped)
● Seatback side and seat cushion side bol-
ster (if equipped)
■ Automatic angle adjustment of the rear
displays (if equipped)
When a seat is adjusted, the angle of the
rear display will be adjusted automatically
to maintain an optimal viewing angle for the
rear display from the rear seat.
■ Customization
Some functions can be customized.
(P.510)
■ Using the driver’s seat adjustment
switches to adjust the front passen-
ger’s seat (front passenger mode)
The mode of the driver’s seat adjust-
ment switches can be changed to
adjust the front passenger’s seat.
1 Press the mode change button on
the driver’s side door.
The indicator will illuminate when front
Operating the front passenger’s
seat from the driver’s seat
To Next Page
Loading...
