241
4-5. Using the driving support systems
4
Driving
● When the navigation system map data is
out of date
● When the navigation system cannot be
used
In this case, the speed limit signs displayed
on the multi-information display and navi-
gation system display may differ.
In the following situations, the RSA sys-
tem will output a warning to notify the
driver.
If the vehicle speed exceeds the
speed warning threshold of the
speed limit sign displayed on the
display, the sign display will be
emphasized and a buzzer will
sound.
When the RSA system detects a do
not enter sign and determines that
the vehicle has entered a no-entry
area, the do not enter sign displayed
on the display will flash and a buzzer
will sound.
■ Operating conditions of the notification
functions
● Excess speed notification function
This function will operate when the follow-
ing condition is met:
• A speed limit road sign is recognized by
the system.
● No entry notification function
This function will operate when all of the
following conditions are met:
• More than one no entry road signs are
recognized by the system simultaneously.
• The vehicle is passing between no entry
road signs recognized by the system.
The following types of road signs
can be displayed.
However, non-standard or recently intro-
duced traffic signs may not be displayed.
Depending on the specifications of
the vehicle, signs may be displayed
overlapping.
The following settings of the RSA can
Notification function
Types of road signs supported
Speed limit
Do Not Enter
No U-turn
No Turn On Red
Stop
Yield
Warning
Changing RSA settings
To Next Page
Loading...
