245
4-5. Using the driving support systems
4
Driving
follow-up cruising (start off operation). If a start off operation is not performed, the con-
trolled stop will continue.
Vehicles with Traffic Jam Assist: While driving on a highway or expressway, if a preceding
vehicle stops, your vehicle will stop accordingly. On some highways and expressways, if the
system determines that the preceding vehicle starts off within approximately 3 minutes of
stopping, a buzzer will sound and a message will be displayed on the multi-information dis-
play to notify the driver, and your vehicle will start off accordingly following the preceding
vehicle. (Extended resume time)
■ Meter display
Multi-information display
Set vehicle speed
Indicators
■ Switches
Driving assist mode select switch
Driving assist switch
“+” switch/“RES” switch
“-” switch
Cancel switch
Vehicle-to-vehicle distance switch
1 Press the driving assist mode select
switch to select dynamic radar
cruise control.
The dynamic radar cruise control indicator
will illuminate.
2 Using the accelerator pedal, accel-
erate or decelerate to the desired
vehicle speed (approximately 20
mph [30 km/h] or more), and press
the driving assist switch to set the
set vehicle speed.
The set vehicle speed will be displayed on
the multi-information display.
The vehicle speed at the moment the
switch is released will be the set vehicle
System components
Using the dynamic radar cruise
control
Setting the vehicle speed
To Next Page
Loading...
