Lexus LS500 2024 - Page 356

356
5-3. Using the air conditioning system and defogger
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit)  Hi (3 segments lit)  Mid
(2 segments lit)  Lo (1 segment lit) 
Off
Adjust the heated steering wheel
temperature level
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit)  Hi (2 segments lit)  Lo (1
segment lit)  Off
Set the automatic mode
• Driver’s seat heater/seat ventilator
• Front passenger’s seat heater/seat venti-
lator
• Heated steering wheel
 Rear seat heater/rear seat ventilator
(if equipped)
Adjust the rear seat ventilator fan
speed level
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit)  Hi (3 segments lit)  Mid
(2 segments lit)  Lo (1 segment lit) 
Off
Adjust the rear seat heater tem-
perature level
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit)  Hi (3 segments lit)  Mid
(2 segments lit)  Lo (1 segment lit) 
Off
Set the automatic mode
• Left-hand side rear seat heater/rear seat
ventilator
• Right-hand side rear seat heater/rear
seat ventilator
■ Rear Multi Operation Panel (if
equipped)
Touch “Climate” on the home screen to
display the air conditioning control
screen.(P.340)
The rear seat heaters and rear seat ventila-
tors can also be operated from the short-
cut screen.
The Rear Multi Operation Panel cannot be
used to operate the rear air conditioning
system if the function is disabled.
(P.352)
 Rear air conditioning control screen
Adjust the rear seat heater tem-
perature level
Each time the switch is selected, the tem-
perature level and level indicator (orange)
change as follows:
AUTOHiMidLoOFF
Adjust the rear seat ventilator fan
speed level
Each time the switch is selected, the fan
speed level and level indicator (blue)
change as follows:
C
D
A
B
C
A
B