EasyManua.ls Logo

Lexus LS500 2024 - Link Button; Operating Homelink

Lexus LS500 2024
572 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
389
5-6. Using the other interior features
5
Interior features
Vehicles with Digital Rearview Mir-
ror
Enabling 2-way communication
with a garage door (only available
for compatible devices)
When enabled, 2-way communication
allows you to check the status of the
opening and closing of a garage door
through indicators in your vehicle.
2-way communication is only available
if the garage door opener motor used
is a compatible device. (To check
device compatibility, refer to
www.homelink.com.)
1 Within 5 seconds after program-
ming the garage door opener has
been completed, if the garage door
opener motor is trained to Home-
Link
®
, both garage door operation
indicators will flash rapidly (green)
and the light on the garage door
opener motor will blink twice, indi-
cating that 2-way communication is
enabled.
If the indicators do not flash, perform 2 and
3 within the first 10 presses of the Home-
Link
®
button after programming has been
completed.
2 Press a programmed HomeLink
®
button to operate a garage door.
3 Within 1 minute of pressing the
HomeLink
®
button, after the
garage door operation has
stopped, press the “Learn” or
“Smart” button on the garage door
opener motor. Within 5 seconds of
the establishment of 2-way com-
munication with the garage door
opener, both garage door opera-
tion indicators in the vehicle will
flash rapidly (green) and the light
on the garage door opener motor
will blink twice, indicating that
2-way communication is enabled.
Reprogramming a single Home-
Link
®
button
When the following procedure is per-
formed, buttons which already have
devices registered to them can be
overwritten:
1 Press and hold the desired Home-
Link
®
button.
2 When the HomeLink
®
indicator
starts flashing orange, release the
HomeLink
®
button and perform
“Programming HomeLink
®
1 (it
takes 20 seconds for the Home-
Link
®
indicator to start flashing).
Before programming
Install a new battery in the transmitter.
The battery side of the transmitter must
be pointed away from the Home-
Link
®
buttons.
Press the appropriate HomeLink
®
Operating HomeLink
®

Table of Contents

Related product manuals