411
6-3. Do-it-yourself maintenance
6
Maintenance and care
■ Installing the engine cover
Engage the claws of the engine cover
to install it.
■ Removing the service cover
1
Pull up the passenger side end of
the rubber strip to disengage it
from the vehicle body.
2
Remove the service cover.
Push the tabs and lift away the service
cover.
■ Installing the service cover
1
Install the service cover.
Make sure to engage the claws on the
windshield side of the service cover when
installing the service cover.
NOTICE
■ Checking the engine cover after
installation
Make sure that the cover is securely
installed in its original position.
Service cover
To Next Page
Loading...
