425
6-3. Do-it-yourself maintenance
6
Maintenance and care
■ When you need to setting the tire
pressure
In the following situations, it will be nec-
essary to perform the tire inflation
pressure setting procedure of the tire
pressure warning system.
When the specified tire inflation
pressure has changed, such as due
to carried load, etc.
When the tire inflation pressure is
changed such as when the tire size
is changed.
If the tire inflation pressure has been
adjusted to the specified level, perform
the tire inflation setting procedure by
selecting specified inflation pressure
on the center display. (P.425)
When the tire inflation pressure is to be
other than specified, such as when tires
other than the specified size are used,
etc., set the tire inflation pressure using
the current pressure. Make sure to
adjust the tire inflation pressure of each
tire to the appropriate level before per-
forming tire pressure setting. The tire
pressure warning system operates
based on this tire inflation pressure.
(P.425)
■ Setting by selecting a specified tire
inflation pressure
1 Start the engine.
The tire inflation pressure cannot be set
while the vehicle is moving.
2 Select on the center display.
3 Select “Vehicle customize”.
4 Select “Tire pressure”.
5 Select “Set indicated air pressure”
and then select the desired front
and rear tire pressures.
6 Select “OK”.
The tire pressure warning light will slowly
blink 3 times.
After setting the tire inflation pressure, a
message indicating that setting has been
completed will be displayed on the
multi-information display.
■ Setting using the current tire infla-
tion pressure
1 Adjust the tire inflation pressure of
each tire to the appropriate level.
Make sure to adjust the tire inflation pres-
sure with the tires cold.
2 Start the engine.
The tire inflation pressure cannot be set
while the vehicle is moving.
3 Select on the center display.
4 Select “Vehicle customize”.
5 Select “Tire pressure”.
6 Select “Set current air pressure”.
7 Select “Continue”.
The tire pressure warning light will slowly
blink 3 times and a message indicating that
tire inflation pressure is being set will be
displayed on the multi-information display.
After setting the tire inflation pressure, a
message indicating that setting has been
Setting the tire pressure
To Next Page
Loading...
