264
7-2. Panoramic view monitor
LS500_LS500h_Navi_OM50F66U_(U)
Moving view
Display mode switching button
Select to change the display mode
between the moving view and the
see-through view.
Rotation pause switch
Select to pause the rotation of the screen.
To resume rotation, select .
Body color setting switch
Select to display the body color setting
screen and change the color of the vehicle
displayed on the panoramic view monitor.
(→P.281)
See-through view
Display mode switching button
Select to change the display mode
between the moving view and the
see-through view.
Rotation pause switch
Select to pause the rotation of the screen.
To resume rotation, select .
Body color setting switch
Select to display the body color setting
screen and change the color of the vehicle
displayed on the panoramic view monitor.
(→P.281)
● Pressing the camera switch again
changes the screen back to the previ-
ously displayed screen, such as the navi-
gation screen.
Checking around the vehicle
The moving view screen and the
see-through view screen provide
support when checking the areas of
around the vehicle while parking.
These screens display an image of
the vicinity of the vehicle combined
from the 4 cameras. The screen will
display a 360° view around the
vehicle from either inside the vehi-
cle or from a birds-eye view at an
angle.
To display the moving
view/see-through view screen,
press the camera switch when the
shift lever is in the “P” position and
the intuitive parking assist is
enabled.
Screen display
To Next Page
Loading...
