27
2-1. Basic information before operation
LS500_LS500h_Navi_OM50F66U_(U)
2
Basic function
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
When the pointer moves close to a
button, it will automatically snap to
that button and the Remote Touch
feedback force (vibration) is gener-
ated by the touchpad.
This feedback force can be
adjusted. (→P.53)
Press the “MENU” button on the
Remote Touch to display the menu
screen. (→P.16)
The map
*
or compass screen can be
displayed by pressing the “MAP”
button on the Remote Touch.
(→P.64)
Press the button on the
Remote Touch to return to the previ-
ous screen.
*
: With navigation function
● Perform touchpad operations using a fin-
ger. Do not use nails or other objects like
pens, etc.
● Perform pointer movement operations
using only one finger. The pointer cannot
be operated by using more than one fin-
ger.
● When water or other foreign materials
are on the touchpad, a malfunction may
occur. In those cases, wipe off the water
or foreign materials and wait about 30
seconds before operating the touchpad.
● In the following cases, there is a possibility
that the touchpad may not react nor-
mally:
• When wearing gloves, etc.
• When operated with a wet hand.
• When a film, paint-like substance, etc., is
on the touchpad.
• When water or other foreign matter is on
the touchpad.
• Near a TV tower, electrical power plant,
gas station, large display, airport or other
facility that generates strong radio waves
or electrical noise.
• When wireless devices, such as portable
radios and mobile phones are nearby.
• When the following metal items are
placed on the touchpad:
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode
<ON mode>.
Touchpad operation
To Next Page
Loading...
