Lexus LS500 - Page 271

271
7-2. Panoramic view monitor
LS500_LS500h_Navi_OM50F66U_(U)
7
Peripheral monitoring system
In automatic display mode, the monitor
will automatically display images in the
following situations:
 When the shift lever is shifted to “N”
or “D” position.
 When vehicle speed is reduced to
approximately 6 mph (10 km/h) or
less.
When automatic display mode of the
Cornering View display is enabled, the
screen will change automatically
between the Side Clearance View and
Cornering View depending on the
turning angle of the steering wheel.
Each time is selected, automatic
display mode of the Cornering View
display is enabled/disabled.
In automatic display mode of Corner-
ing View, the monitor will automatically
display Cornering View images in the
following situations:
 When the shift lever is shifted to “N”
or “D” position.
 When vehicle speed is reduced to
approximately 7 mph (12 km/h) or
less.
 When the steering wheel is turned
by 180° or more from the center
(straight-line) position.
Cornering View images will disappear
when the turning angle of the steering
wheel becomes 45° or less from the
center (straight-line) position.
 Side Clearance View & panoramic
view
 Check the positions and distance
between the vehicle width guide line
and a target object such as the
obstacle or curb of the road.
Automatic display mode of Cor-
nering View
Using the vehicle width guide line