Lexus LS500 - Page 302

302
8-1. Phone operation (Hands-free system for cellular phones)
LS500_LS500h_Navi_OM50F66U_(U)
 switch
 “MENU” button → “Phone”
2 Select “Contacts” on the sub menu
and select the desired contact.
3 Select the desired number.
“E-mail Addresses”: Select to display all
registered e-mail addresses for the con-
tact.
“Addresses”: Select to display all registered
addresses for the contact.
4 Check that the dialing screen is dis-
played.
■ For PBAP compatible Bluetooth
®
phones when “Automatic Transfer”
is set to on (→P.314)
 Contacts are transferred automati-
cally.
■ For PBAP compatible Bluetooth
®
phones when “Automatic Transfer”
is set to off (→P.314)
1 Select the desired item.
Select to always transfer all the
contacts from a connected cellular
phone automatically.
Select to transfer all the contacts
from a connected cellular phone
only once.
Select to cancel transferring.
2 Check that a confirmation screen is
displayed when the operation is
complete.
■ For PBAP incompatible but OPP
compatible Bluetooth
®
phones
1 Select the desired item.
Select to transfer the contacts from
the connected cellular phone.
Transfer the contact data to the sys-
tem using a Bluetooth
®
phone.
Select to add a new contact manu-
ally.
Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (→P.317)
Select to cancel transferring.
● If your cellular phone is neither PBAP nor
OPP compatible, the contacts cannot be
transferred using Bluetooth
®
. But the
contacts can be transferred from USB
device. (→P.316)
● Depending on the type of Bluetooth
®
phone:
• It may be necessary to perform additional
steps on the phone when transferring
contact data.
• The registered image in the contact list
may not transfer depending on the type
of Bluetooth
®
phone connected.
When the contact list is empty
A
B
C
A
B
C