Lexus LS500 - Talking on the Bluetooth Hands-Free System

304
8-1. Phone operation (Hands-free system for cellular phones)
LS500_LS500h_Navi_OM50F66U_(U)
other party’s name or number may not be
displayed correctly depending on the
type of Bluetooth
®
phone you have.
● The ringtone that has been set in the
sound settings screen can be heard when
there is an incoming call. Depending on
the type of Bluetooth
®
phone, both the
system and Bluetooth
®
phone may ring
simultaneously when there is an incoming
call. (→P.312)
● The incoming call display mode can be
set. (→P.313)
 Main display
Select to display the keypad to send
tones. (→P.305)
Select to send tones. This button
only appears when a number that
contains a (w) is dialed in
hands-free mode. (→P.305)
Select to adjust your voice volume
that the other party hears from their
speaker. (→P.305)
Select to mute your voice to the
other party.
Select to mute the Navigation
route guidance during a phone
call.
*
Select to change handset modes
between hands-free and cellular
phone.
Select to put a call on hold.
Talking on the Bluetooth
®
hands-free system
While talking on the phone, the fol-
lowing screen is displayed. The
operations outlined below can be
performed on this screen.
Call screen operation
A
B
C
D
E
F
G