Lexus LS500 - Page 306

306
8-1. Phone operation (Hands-free system for cellular phones)
LS500_LS500h_Navi_OM50F66U_(U)
3 Press the button on the
Remote Touch to display previous
screen.
● The sound quality of the voice heard from
the other party’s speaker may be nega-
tively impacted.
● “Transmit Volume” is dimmed when mute
is on.
 When there are no calls on hold
during a call: “Hold” is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: “Activate” is
displayed. When selected, the sys-
tem switches to the call that was on
hold.
 When there is another call on hold
during a call: “Swap Calls” is dis-
played. When selected, the current
call is placed on hold, and the sys-
tem switches to the call that was on
hold.
● This function may not be available
depending on the type of Bluetooth
®
phone.
● This screen can be displayed on the main
display or side display.
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
The incoming screen can also be dis-
played on the side display.
1 Select “Answer” or press the
switch on the steering wheel to
start talking with the other party.
 To refuse to receive the call: Select
“Decline”.
 Each time “Swap Calls” is selected,
the party who is on hold will be
switched.
● This function may not be available
depending on the type of Bluetooth
®
phone.
● This screen can be displayed on the main
display or side display.
Switching calls while a call is in
progress
Incoming call waiting