Lexus LS500 - Bluetooth Phone Message Function; Bluetooth Phone Message Func- Tion

307
8-1. Phone operation (Hands-free system for cellular phones)
LS500_LS500h_Navi_OM50F66U_(U)
8
Phone
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select a desired account name that
is displayed on the left side of
screen.
 Account names are the names of
the accounts that exist on the cur-
rently connected phone.
5 Check that the message screen is
displayed.
“Phone”: Select to change to phone mode.
 The following functions can be used
on message function:
• Receiving a message (→P.307)
• Checking messages (→P.308)
• Replying to a message (dictation
reply) (→P.308)
• Replying to a message (quick reply)
(→P.309)
• Calling the message sender
(→P.310)
• Message settings (→P.319)
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is ready
to be operated on the screen.
Select to check the message.
Select to not open the message.
Select to call the message sender.
● To display the above screen, it needs to
be set to “Full Screen” on “Incoming
SMS/MMS Display” and “Incoming
E-mail Display”. (→P.313) Default setting
is “Drop-down”.
Bluetooth
®
phone message
function
Received messages can be for-
warded from the connected
Bluetooth
®
phone, enabling
checking and replying using the
system.
Depending on the type of
Bluetooth
®
phone connected,
received messages may not be
transferred to the system.
If the phone does not support the
message function, this function
cannot be used. Even when the sup-
ported phone is used, reply function
may not be used.
Displaying the message screen
Receiving a message
A
B
C