Lexus LS500 - Page 316

316
8-2. Setup
LS500_LS500h_Navi_OM50F66U_(U)
 This operation may be unnecessary
depending on the type of
Bluetooth
®
phone.
 To cancel this function, select “Can-
cel”.
4 Check that a confirmation screen is
displayed when the operation is
complete.
 When the contact is registered
1 Select “Transfer Contacts from
Device”.
2 Select “From Phone (Bluetooth
*
)”.
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
3 Select “Replace Contacts” or “Add
Contact”.
“Replace Contacts”: Select to transfer the
contact from the connected cellular phone
and replace the current one.
“Add Contact”: Select to transfer the
desired contact data from the connected
cellular phone to add to the current one.
4 Transfer the contact data to the sys-
tem using a Bluetooth
®
phone.
 This operation may be unnecessary
depending on the type of
Bluetooth
®
phone.
 To cancel this function, select “Can-
cel”.
5 Check that a confirmation screen is
displayed when the operation is
complete.
Backed-up contact data (“vCard” for-
matted) can be transferred from USB
device or Bluetooth
®
phone to this
system.
1 Push the knob and lift the armrest.
2 Open the cover and connect a
device.
 Turn on the power of the USB
device or Bluetooth
®
phone if it is
not turned on.
3 Select “Transfer Contacts from
Device”.
4 Select “From USB”.
5 Select “USB 1” or “USB 2” when
the multiple USB devices are con-
nected. If a USB device is con-
nected, skip this procedure.
6 Select “Replace Contacts” or “Add
Contact”. If the contact is already
registered, skip this procedure.
“Replace Contacts”: Select to transfer the
contact from the connected USB device or
From USB device