Lexus LS500 - Page 317

317
8-2. Setup
LS500_LS500h_Navi_OM50F66U_(U)
8
Phone
Bluetooth
®
phone and replace the current
one.
“Add Contact”: Select to transfer the
desired contact data from the connected
USB device or Bluetooth
®
phone to add
to the current one.
7 Select a desired file from vCard file
list.
8 Check that a confirmation screen is
displayed when the operation is
complete.
● Depending on the type of Bluetooth
®
phone used and number of files, it may
take time to display vCard file lists and
download contacts.
● Downloading may not complete cor-
rectly in the following cases:
• If the engine switch <power switch> is
turned off during downloading.
• If the USB device or Bluetooth
®
phone is
removed before downloading is com-
plete.
New contact data can be registered.
Up to 4 numbers per person can be
registered.
1 Select “New Contact”.
2 Enter the name and select “OK”.
3 Enter the phone number and select
“OK”.
4 Select the phone type for the
phone number.
5 To add another number to this con-
tact, select “Yes”.
■ Registering a new contact in a dif-
ferent way (from the call history
screen)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “History” on the sub menu
and select a contact not yet regis-
tered in the contact list.
4 Select “Add to Contacts”.
5 Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (→P.317)
1 Select “Edit Contact”.
2 Select the desired contact.
3 Select next to the name or
desired number.
4 Enter the name or the phone num-
ber and select “OK”.
1 Select “Delete Contacts”.
2 Select the desired contact and
press the button on the Remote
Touch.
“Select All”: Select all items in the list.
“Unselect All”: Unselect all items in the list.
“Delete”: Delete selected items in the list.
3 Select “Delete”.
4 Select “Yes” when the confirmation
screen appears.
● Multiple data can be selected and
Registering a new contact to the
contacts list
Editing the contact data
Deleting the contact data