Lexus LS500 - Page 322

322
8-3. What to do if...
LS500_LS500h_Navi_OM50F66U_(U)
■ Automatic Bluetooth
®
connec-
tion on this system is set to off.
Set automatic Bluetooth
®
connection
on this system to on when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>. (→P.47)
■ Preferred device settings function
on this system is set to on.
Set preferred device settings function
on this system to off. (→P.47)
Set the desired cellular phone to the
highest automatic connection priority.
(→P.47)
■ Your vehicle is in a area.
Move to where no longer appears
on the display.
■ The profile version of the con-
nected cellular phone may not be
compatible with transferring
phonebook data.
For a list of specific devices which
operation has been confirmed on this
system, check with your Lexus dealer
or the following website:
http://www.lexus.com/MobileLink
■ Automatic contact transfer func-
tion on this system is set to off.
Set automatic contact transfer function
on this system to on. (→P.314)
■ Passcode has not been entered on
the cellular phone.
Enter the passcode on the cellular
phone if requested (default passcode:
1234).
■ Transfer operation on the cellular
phone has not completed.
Complete transfer operation on the
cellular phone (approve transfer oper-
ation on the phone).
■ Automatic contact transfer func-
tion on this system is set to on.
Set automatic contact transfer function
on this system to off. (→P.314)
■ Message transfer is not enabled on
the cellular phone.
Enable message transfer on the cellu-
lar phone (approve message transfer
on the phone).
■ Automatic transfer function on this
system is set to off.
Set automatic transfer function on this
system to on. (→P.314)
When making/receiving a call
A call cannot be made/received.
When using the phonebook
Phonebook data cannot be trans-
ferred manually/automatically.
Phonebook data cannot be edited.
When using the Bluetooth
®
mes-
sage function
Messages cannot be viewed.