328
9-1. Lexus Enform overview
LS500_LS500h_Navi_OM50F66U_(U)
Smart phone
*
Using the App Suite, communication is relayed between the system, applica-
tion server and contents provider. The smart phone can be opened while com-
munication, though the phone will display the Enform HS App lock screen. The
smart phone cannot be operated while communicating.
Applications
Display usable content from the content providers on the screen using the data
connection of the connected smart phone or DCM.
System
Content received, via a smart phone or DCM, from content provider servers is
displayed on the screen. The system is equipped with an application player to
run applications.
Via DCM
*
: For known compatible phones, refer to http://www.lexus.com/MobileLink.
■ Subscription
App Suite does not require an acti-
vation fee or monthly recurring fees.
Services requiring a separate con-
tract can also be used.
*
*
: For details, refer to
http://www.lexus.com/enform/
or call
1-800-255-3987.
■ Availability of function
Lexus Enform App Suite 2.0 is avail-
able in the contiguous United
States, Washington D.C., Alaska,
Hawaii, Puerto Rico and Canada.
Lexus Enform App Suite 2.0 is not
available in the United States Virgin
Islands.
● Data usage fees may apply while using
App Suite function. Confirm data usage
fees before using this function.
● The required operations to activate appli-
cations and connect a smart phone to the
system, and the registration steps for the
App Suite are explained in this section.
For details regarding operation of the
App Suite and the applications, refer to
http://www.lexus.com/enform/
.
● Availability of functions of the Lexus
Enform service is dependent on network
reception level.
■ Initializing personal data
The personal data used in applications
can be reset. (→P.56)
The following personal data can be
deleted and returned to their default
settings:
• Downloaded contents
• Radio stations that were listened to
● Once initialized, the data and settings will
be erased. Pay much attention when ini-
tializing the data.
Before using the function