Lexus LS500 - Page 35

35
2-1. Basic information before operation
LS500_LS500h_Navi_OM50F66U_(U)
2
Basic function
2 Select the desired candidate.
 To select a candidate that is not dis-
played, select , and then
select the desired predictive
replacement candidate.
Characters can be entered by hand
writing.
Write the characters to be entered.
Select the candidate character that
corresponds to the entered hand
written character.
Select the candidate character that
is displayed to enter the next
desired character.
 Depending on the input screen and
conditions, the following operations
can be performed.
• Back space: Draw a straight line from
the bottom right to the bottom left.
• Space: Draw a line from the top left to
the bottom left and then continue to the
bottom right at a right angle.
• Line Break: Draw a line from the top
right to the bottom right and then con-
tinue to the bottom left at a right angle.
● To deselect the handwriting input range,
press the touchpad of the Remote Touch
or sub function button.
The list screen may be displayed after
entering characters. When a list is dis-
played, use the appropriate screen
button to scroll through the list.
Select this part to scroll the list by
operating the scroll bar.
To release scrolling the list, select
the scroll bar again.
Select to scroll the list.
● With navigation function: Matching items
Hand writing method
A
B
C
List screen
Scrolling list screen
A
B