Lexus LS500 - Page 43

43
2-2. Connectivity settings
LS500_LS500h_Navi_OM50F66U_(U)
2
Basic function
color.
 Selecting a profile icon which is not
currently connected will switch the
connection to the function.
 If the desired Bluetooth
®
device is
not on the list, select “Add New
Device” to register the device.
(→P.44)
4 Select the desired connection.
 When another Bluetooth
®
device is
connected
 To disconnect the Bluetooth
®
device, select “Yes”.
5 Check that a confirmation screen is
displayed when the connection is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
● It may take time if the device connection
is carried out during Bluetooth
®
audio
playback.
● Depending on the type of Bluetooth
®
device being connected, it may be neces-
sary to perform additional steps on the
device.
● When disconnecting a Bluetooth
®
device, it is recommended to disconnect
using the system.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Connect Phone”.
5 Select the device to be connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Select Device” on the sub
menu.
4 Select desired device name from
the list.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Media”.
3 Select “Source” on the sub menu.
4 Select “Bluetooth
*
”.
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
5 Select “Connect”.
Connecting a Bluetooth
®
device
in a different way (from phone
setup screen)
Connecting a Bluetooth
®
device
in a different way (from phone
screen)
Connecting a Bluetooth
®
device
in a different way (from
Bluetooth
®
audio screen)