44
2-2. Connectivity settings
LS500_LS500h_Navi_OM50F66U_(U)
6 Select desired device name from
the list.
■ Auto connection mode
To turn auto connection mode on, set
“Bluetooth
*
Power” to on. (→P.46)
Leave the Bluetooth
®
device in a loca-
tion where the connection can be
established.
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
When the engine switch <power
switch> is in ACCESSORY or
IGNITION ON mode <ON mode>,
the system searches for a nearby
registered device.
The system will connect with the
registered device that was last con-
nected, if it is nearby. When auto-
matic connection priority is set to on
and there is more than one regis-
tered Bluetooth
®
phone available,
the system will automatically con-
nect to the Bluetooth
®
phone with
the highest priority. (→P.46)
■ Connecting manually
When the auto connection has failed
or “Bluetooth
*
Power” is turned off, it is
necessary to connect the Bluetooth
®
device manually.
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
1 Display the Bluetooth
®
setup
screen:
“MENU” button → “Setup” →
“Bluetooth
*
”
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
2 Follow the steps in “Connecting a
Bluetooth
®
device” from step 2.
(→P.42)
■ Reconnecting the Bluetooth
®
phone
If a Bluetooth
®
phone is disconnected
due to poor reception from the
Bluetooth
®
network when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>, the system automatically
reconnects the Bluetooth
®
phone.
Up to 5 Bluetooth
®
devices can be
registered.
Bluetooth
®
compatible phones (HFP)
and audio players (AVP) can be regis-
tered simultaneously.
This operation cannot be performed
while driving.
1 Display the Bluetooth
®
setup
screen:
“MENU” button → “Setup” →
“Bluetooth
*
”
*
: The Bluetooth
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
2 Select “Add New Device”.
Registering a Bluetooth
®
device