Lexus LS500 - Page 50

50
2-2. Connectivity settings
LS500_LS500h_Navi_OM50F66U_(U)
Wi-Fi
®
can be displayed. (→P.50)
1 Enable the Wi-Fi
®
Hotspot func-
tion. (→P.50)
2 Enable the “Hide Access Point”
function. (→P.49)
3 Enter the access point name (SSID)
into the device you wish to connect
and connect it.
 To check the vehicle access point
password, check “Password”.
(→P.50)
 The security settings on the device
must be the same as that displayed
for “Security”. (→P.50)
 For details about operating the
device, refer to the documentation
which came with it.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi
*
” on the sub menu.
*
: Wi-Fi is a registered mark of the Wi-Fi
Alliance
®
.
4 Select the desired item to be set.
Select to enable/disable the Wi-Fi
®
Hotspot function. (→P.51)
Select to check/change the access
point password. (→P.51)
Select to display hints for connect-
ing to the vehicle via Wi-Fi
®
.
Select to make the access point
searchable/unsearchable.
Select to check/change the secu-
rity protocol of the access point (for
authentication and encryption).
(→P.51)
Select to change the access point
name (SSID). (→P.51)
Select to change the Wi-Fi
®
con-
nection channel (within the
2.4GHz frequency band). (→P.51)
● If any settings have been changed, it will
Connecting a device to the
in-vehicle access point using the
access point name (SSID)
Changing the Wi-Fi
®
settings
A
B
C
D
E
F
G