Lexus LS500 - Page 65

65
3-1. Basic operation
LS500_LS500h_Navi_OM50F66U_(U)
3
Navigation system
2 Check that the micro city map is
displayed.
● To return to the normal map display,
select .
● If the map or the current position is
moved to the area which is not covered
by the micro city map, the screen scale
automatically changes to 150 ft. (50 m).
● On the micro city map, a one way street is
displayed by .
● Scrolling the micro city map is not avail-
able while driving.
● Certification
Building micro cities in the database were
created and provided by HERE.
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by
selecting the orientation symbol dis-
played at the top left of the screen.
: North-up symbol
Regardless of the direction of vehicle
travel, north is always up.
: Heading-up symbol
The direction of vehicle travel is always
up.
: 3D Heading-up symbol
The direction of vehicle travel is always
up.
 The letter(s) under this symbol indi-
cate the vehicle’s heading direction
(e.g. N for north).
The map can be scrolled to view loca-
tions that are different than your cur-
rent position.
1 Select the desired point on the map
screen.
 Move the desired point on the cen-
ter of the map screen.
Cursor mark
Distance from the current position
to the cursor mark
Select to register as a memory
point. To change the icon, name,
etc.: →P.89
Select to set as a destination.
(→P.79)
 Press the “MAP” button on the
Remote Touch to return to the cur-
rent position.
The map screen can be moved to drag
or flick the touchpad on the Remote
Touch. To activate drag/flick operation,
“Map Flick” is required to be “On”.
Orientation of the map
Map scroll operation
Flick scroll operation
A
B
C
D