78
3-2. Destination search
LS500_LS500h_Navi_OM50F66U_(U)
2 Enter a phone number and select
“OK”.
If multiple locations with the same
phone number exist, the list screen
will be displayed.
● If there is no match for the entered phone
number, a list of identical numbers with
different area codes will be displayed.
To use this function, it is necessary to
register a home and/or a favorite loca-
tion. Up to 2 favorites can be regis-
tered as preset destinations. (→P.89,
90)
To set the home or a preset destination
as the destination, select the corre-
sponding button.
1 Turn the engine switch <power
switch> to ACCESSORY or IGNI-
TION ON mode <ON mode>.
2 Press the “MAP” button on the
Remote Touch.
3 Select the desired item.
Select to set the registered home as
the destination.
Select to set a registered favorite as
the destination. (Up to 2 favorites
can be registered as preset desti-
nations.)
The estimated time of arrival to the
registered home and preset desti-
nations from the current position will
be displayed.
If the home or a preset destination
has not been registered, “Save
Home” or “Save Favorite” will be
displayed, respectively. To register a
home or preset destination, select
the corresponding button.
● When the destination is very close to the
current position, “Nearby” will be dis-
played.
● The one-touch buttons for home and
favorites will disappear after the vehicle
has been driven for a while.
● The color of the estimated arrival time
indicator may change depending on the
traffic information received.
● This function is available when “Auto-
matic Destination List Info” is set to on.
(→P.94)
One-touch setting home/favor-
ite as a destination
To Next Page
Loading...
