Lexus LS500 - Starting Route Guidance

79
3-2. Destination search
LS500_LS500h_Navi_OM50F66U_(U)
3
Navigation system
1 Select “Go” on the confirm destina-
tion screen.
 For details about this screen: →P.79
2 Select “OK” on the route overview
screen.
 For details about this screen:
→P.80
● The route for returning may not be the
same as that for going.
● The route guidance to the destination
may not be the shortest route or a route
without traffic congestion.
● Route guidance may not be available if
there is no road data for the specified
location.
● When setting the destination on a map
with a scale more than 0.5 mile (800 m),
the map scale changes to 0.5 mile (800
m) automatically. If this occurs, set the
destination again.
● If a destination that is not located on a
road is set, the vehicle will be guided to
the point on a road nearest to the destina-
tion. The road nearest to the selected
point is set as the destination.
Select to adjust the position in
smaller increments. (→P.66)
Select to search for the route.
(→P.79)
• If a destination has already been set, “Go
Directly” and “Add to Route” will be dis-
played.
“Go Directly”: Select to delete the existing
destination(s) and set a new one.
“Add to Route”: Select to add a destination
to the current route.
Select to register as a memory
point.
Select to call the registered num-
ber.
Starting route guidance
When the destination is set, the
confirm destination screen will be
displayed.
Starting route guidance
WARNING
● Be sure to obey traffic regulations and
keep road conditions in mind while
driving. If a traffic sign on the road has
been changed, the route guidance
may not indicate such changed infor-
mation.
Confirm destination screen
A
B
C
D