Lexus LS500 - Editing Route

87
3-3. Route guidance
LS500_LS500h_Navi_OM50F66U_(U)
3
Navigation system
1 Select on the map screen.
2 Select the desired item to be set.
Select to display the overview of
the entire route. (→P.80)
Select to reorder destinations.
(→P.87)
Select to change route type.
(→P.87)
Select to set route preferences.
(→P.87)
Select to set detours. (→P.87)
Select to start from adjacent road.
(→P.88)
3 Check that the route overview is
displayed. (→P.80)
When more than 1 destination has
been set, the arrival order of the desti-
nations can be changed.
1 Select on the map screen.
2 Select “Reorder”.
3 Select the desired destination and
select “Move Up” or “Move Down”
to change the arrival order. Then
select “OK”.
1 Select on the map screen.
2 Select “Route Type”.
3 Select the desired route type.
 The entire route from the starting
point to the destination is displayed.
(→P.80)
 During driving, the route guidance
starts after selecting the desired
route type.
The conditions to determine the route
can be selected from various choices
such as freeways, toll roads, ferries, etc.
1 Select on the map screen.
2 Select “Preference”.
3 Select the desired route prefer-
ences and select “OK”.
● Even if the “Freeways” route preference is
turned off, the route may not be able to
avoid freeways in some cases.
● If the calculated route includes a trip by
ferry, the route guidance shows a sea
route. After traveling by ferry, the current
position may be incorrect. Upon recep-
tion of GPS signals, it is automatically
corrected.
During the route guidance, the route
can be changed to detour around a
section of the route where a delay is
Editing route
Displaying the edit route screen
Reordering destinations
A
B
C
D
E
F
Selecting route type
Setting route preferences
Detour setting