88
3-3. Route guidance
LS500_LS500h_Navi_OM50F66U_(U)
caused by road repairs, an accident,
etc.
1 Select on the map screen.
2 Select “Detour”.
3 Select the desired detour distance.
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of
the current position.
Select to detour within 5 miles of
the current position.
Select to detour on the entire route.
Select to make the system search
for the route based on traffic con-
gestion information received from
traffic information.
*
(→P.70)
*
: This function is not made available in
some countries or areas.
● This picture shows an example of how the
system would guide around a delay
caused by a traffic jam.
This position indicates the location of a
traffic jam caused by road repairs, an
accident, etc.
This route indicates the detour sug-
gested by the system.
● When the vehicle is on a freeway, the
detour distance selections are 5, 15 and
25 miles (or 5, 15 and 25 km if units are
in km).
● The system may not be able to calculate a
detour route depending on the selected
distance and surrounding road condi-
tions.
When a freeway and a surface road
run in parallel, the system may show
the guidance route going on the free-
way while driving on the surface road,
or vice versa.
If this happens, you can instantly
choose the adjacent road for the route
guidance.
1 Select on the map screen.
2 Select “Adjacent Road”.
● When there is no adjacent road, this
screen button will not be displayed.
Adjacent road